ew SAFETY AUTOMATION MEASUREMENT AND CONTROL Short Form Catalog Catalog n.12 NORSTAT INC. 300 Roundhill Dr. Rockaway, NJ 07866 Tel: 973-586-2500 Fax: 973-586-1590 www.norstat.
CONTENTS SAFETY SENSORS • EOS4 • ADMIRAL • JANUS • EOS2 • VISION • MAGNUS Type 4 light curtains Type 4 light curtains Type 4 light curtains Type 2 light curtains Type 2 light curtains PLd/PLe magnetic switches and control unit Page Page Page Page Page Page 2 4 6 10 12 15 • ILION, ULISSE Type 2 photocells and control units Page 20 • PHARO Type 3 laser scanner Page 21 SAFETY INTERAFACES AND CONTROLLERS • MOSAIC • AD SR SIL 3 Modular safety integrated controller Type 4/Cat.
INTRODUCTION This Short Form catalog illustrates our product range in clear, straightforward format. For more in-depth information, please consult our full catalog containing detailed data on all products plus a useful Safety Guide. Full details are also available on www.reer.it. However, the Short Form Catalog contains all basic data on all our product lines.
EOS4 EOS4 is a compact Type 4 light curtain with competitive performance and innovative features. Its features include: ▪Minimal cross section - 28 x 30 mm. ▪No blind area on one side: position of first beam ensures that the sensitive area extends to end of the light curtain. ▪The solution with two L-mounted light curtains, e.g. Master-Slave, maintains 40 mm resolution (hand detection) in corner (models with resolution up to 40 mm). ▪Minimal blind area on connector side.
TYPE 4 SAFETY LIGHT CURTAINS EOS4 THE EOS4 RANGE EOS4 A ▪Protected height range 160 to 1510 mm ▪7 types of detection: - Resolution 14 mm for finger detection - Resolution 20 - 30 - 40 mm for hand detection - Resolution 50 - 90 mm for detection of the body in a dangerous area - 2 - 3 - 4 beams for detection of the body in access monitoring ▪Max range 12 m and 20 m for H models (6 m for 14 mm resolution) ▪2 safety static outputs PNP with auto-test protected against short circuits and overloads ▪Automatic Sta
ADMIRAL Type 4 Safety light curtains providing: ▪Easy connection and installation thanks to the M12 connectors and the use of unshielded cables up to 100 m. ▪Built-in main safety functions. ▪2 safety PNP static outputs. ▪Master/Slave Models for cascade connection of two light curtains. ▪Models with Floating Blanking. ▪Models with 2, 3 and 4 beams Long Range, max 60 meters. ▪IP 65 protection rate. ▪Operating temperature range: 0 to 55 °C. ▪Cross section 35 x 45 mm.
TYPE 4 SAFETY LIGHT CURTAINS ADMIRAL ADMIRAL AX LR Long Range ▪2 - 3 - 4 beams for detection of the body in access monitoring ▪Max range 60 m ▪M12, 5-pole connector for emitter and M12, 8-pole for receiver ▪Integrated, selectable manual or automatic Start/Restart ▪Feedback input for external relay monitoring (EDM). Ideal light grid for large size protection applications, also on several sides using deflection mirrors.
JANUS Type 4 safety light curtains and grids, robust and integrated. The range comprises Janus M with Muting and Janus J without Muting function. The Janus range includes models TRX with one active element and one passive retroreflecting element which does not require electrical connections. Janus M and M TRX are also available with built-in muting sensors.
TYPE 4 SAFETY LIGHT CURTAINS JANUS THE JANUS RANGE JANUS M and JANUS M TRX with built-in Muting function - Janus MI and MI TRX with connectors for external sensors of any type - Janus MI TRXL with single connector for all connections, including external sensors - Janus ML and ML TRX and Janus MT and MT TRX featuring an innovative horizontal arm system with built-in Muting photoelectric sensors, prewired and prealigned - Janus ML TRX G and Janus MT TRX G (Glass) with special built-in muting sensors to optim
JANUS JANUS MI TRX, MI TRXL Janus MI TRX and MI TRXL consist of one active emitter/receiver element and one retro-reflecting passive element which does not need electrical connections. ▪Models MI TRX with M12 front connectors for external Muting sensors with 2 or 4-sensor logics for both two-way entry/exit (2 – 4 sensors) and one-way (2 sensors) exit only.
TYPE 4 SAFETY LIGHT CURTAINS JANUS JANUS MM TRX [NEW PRODUCT] Janus MM TRX is a modular system which permits to add the pre-wired muting arms in order to get either a ML TRX (one way) or a MT TRX (entry/exit) model with a few simple steps. SL TRX and ST TRX are the pre-wired muting arms and can be ordered separately. Janus MM TRX can also be used with external Muting sensors, with 2 or 4 sensors logic.
EOS2 EOS2 is a compact Type 2 light curtain with competitive performance and innovative features. Its features include: ▪Minimal cross section - 28 x 30 mm. ▪No blind area on one side: position of first beam ensures that the sensitive area extends to end of the light curtain. ▪The solution with two L-mounted light curtains, e.g. Master-Slave, maintains 40 mm resolution in corner (models with resolution 30 and 40 mm). ▪Minimal blind area on connector side.
TYPE 2 SAFETY LIGHT CURTAINS EOS2 THE EOS2 RANGE EOS2 A ▪Protected height range 160 to 1510 mm ▪5 types of detection: - Resolution 30 - 40 mm for hand detection - Resolution 50 - 90 mm for detection of the body in a dangerous area - 2 - 3 - 4 beams for detection of the body in access monitoring ▪Max range 12 m ▪2 safety static outputs PNP with auto-test protected against short circuits and overloads ▪Automatic Start/Restart ▪M12, 5-pole connectors The ideal light curtain for straightforward interfacing wit
VISION Type 2 safety light curtains offering the following main features: ▪Easy connection and installation thanks to the M12 connectors and the use of unshielded cables up to 100 m. ▪Built-in main safety functions. ▪2 safety PNP static outputs. ▪Built-in auto-test function, every 0.5 sec. ▪Models Master/Slave for cascade connection of two light curtains. ▪Models with 2, 3 and 4 beams Long Range, max 60 m. ▪Built-in Muting function for models MXL. ▪Built-in Muting sensors for models MXL L and MXL T.
TYPE 2 SAFETY LIGHT CURTAINS VISION VISION VX ▪Protected height range 160 to 1810 mm ▪6 types of detection: - Resolution 20 – 30 – 40 mm for hand detection - Resolution 50 – 90 mm for detection of the body in a dangerous area - 2 - 3 - 4 beams for detection of the body in access monitoring ▪Max range 18 m ▪M12, 5-pole connector for emitter and M12, 8-pole for receiver ▪Integrated, selectable manual or automatic Start/Restart ▪Feedback input for external relay monitoring (EDM) ▪Master and Slave models for s
VISION VISION MXL, MXL U ▪Light curtain connection for external Muting sensors of any type through main connector ▪Muting logics, two-way entry/exit (2 sensors) for models MXL ▪Muting logics, mono-directional, exit only (2 sensors) for models MXL U ▪Protected height range 310 to 1810 mm for resolution 40 mm (310 to 1210 mm for resolution 30 mm) ▪3 types of detection: - Resolution 30 - 40 mm for hand detection - 2 - 3 - 4 beams for detection of the body in access monitoring ▪Max range 8 m.
SAFETY MAGNETIC SWITCHES NEW PRODUCT MAGNUS MG S - RECTANGULAR COMPACT HOUSING ▪Compact and robust fiberglass housing: 22 mm fixing ▪IP67 rating ▪Operating temperature -25…+75°C ▪Coded magnetic operation – Tamper resistant ▪Switching distance 3…10 mm ▪Sensor with 4 wires: 2 NO contacts ▪M8 4-pole connector ▪Can be connected to MOSAIC safety configurable controller (PL e) or to the dedicated safety control unit MG d1(PL d) MG B - RECTANGULAR HOUSING ▪Robust fiberglass housing: 78 mm fixing ▪IP67 rating ▪O
MOSAIC MOSAIC is the new modular and configurable safety controller of ReeR. This new safety device is capable of monitoring several safety sensors and commands at the same time such as safety light curtains, safety photocells, emergency stops, safety mats, magnetic or mechanical switches, two-hand controls, etc. Thanks to MOSAIC’s modular and expandable structure, it is possible to adapt its I/O configuration and functionality to the demands of many different applications.
MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC Main unit and expansion units features ▪M1 stand alone main unit: - 8 safety inputs, 2 OSSD pairs - 400 mA output current - with separate EDM and Start/Restart - configurable via PC through USB interface - MCM (Mosaic Configuration Memory card) slot for program storage ▪MI8O2 expansion unit: - 8 safety inputs, 2 OSSD pairs - 400 mA output current - with separate EDM and Start/Restart ▪MI8 and MI16 expansion units: - 8 and 16 safety inputs ▪MO2 and MO4 expansion u
SAFETY INTERFACES AND RELAYS AD SR1 Interface module between the safety light curtains EOS4 A, EOS2 A, Admiral AD, Admiral AX BK, Vision V and the machine control circuits. With guided-contact safety relays, 2 NO contacts and PNP output for relay status signaling. ▪Start/Restart interlock ▪EDM Feedback input for extra external contactors monitoring. Safety level: E S P E TYPE 4 SIL 3 – SILCL 3 – PL e – Cat.
SAFETY INTERFACES SAFETY INTERFACES AND RELAYS AD SRT Safety relays for two-hand control. With 2 NO + 1 NC guided-contact safety relays. EDM Feedback input for external contactors monitoring. The AD SRT can be used up to Cat. 4, PL e. It is certified as Type III C according to the EN 574 standard and monitors the simultaneity between the two inputs (< 0.5 sec). E S P E Safety level: CAT. 4 PL e – Cat.
TYPE 2 PHOTOCELLS AND CONTROL UNITS ILION, ULISSE, AU SX, AU SXM ILION Type 2 safety photocell with cylindrical M18 metal body and M12 connector. Ilion may be combined with the control units AU SX or AU SXM with Muting thus forming a protection system including 1, 2, 3 or 4 photocells. The ILION range consists of: IL 10, range 8 m IL 20, range 20 m. IP 67 protection rate. Connection length (between sensors and control unit) max 50 m.
TYPE 3 SAFETY LASER SCANNER PHARO Safety laser scanner PHARO is an optoelectronic device for accident prevention creating programmable protected horizontal or vertical areas of variable shape without the need of using a separate reflector or a receiver. The device does not need an external control unit as all safety functions are built-in. PHARO has a Configuration Memory Module built into the pull-out connector, where data on protected areas and programmed operational parameters are stored.
METRON Photoelectric light curtains for industrial and civil applications requiring detection, measurement and identification of objects. METRON will provide information for: ▪Detecting objects ▪Counting items ▪Defining position ▪Identifying shape or outline ▪Measuring dimensions. For programming models A and B each light curtain is provided with PC-compatible configuration Software Metronconf, with practical graphic interface.
LIGHT CURTAINS FOR MEASUREMENT, AUTOMATION AND CONTROL METRON EXAMPLES OF APPLICATIONS Two-dimensional detection of objects in transit on conveyor system using 2 light curtains. Volume may be calculated using third horizontal light curtain or considering travel speed. Automated warehousing: detection of max height of objects in drawers for efficient management of machine capacity. Detection of position and outline of workpieces in automated painting systems.
WTF, WTHF WATERTIGHT ENCLOSURES Watertight enclosures allow light curtains and grids to be used in harsh working environments with exposure to water and steam. Thanks to its inert (non-toxic) components, no residuals are left when the light curtains are washed down or when they come directly in contact with food. This makes WTF and WTHF enclosures suitable for the Food & Beverage industry.
ACCESSORIES ACCESSORIES SP Deflection mirrors Ideal for perimeter protection of up to 4 sides. Angular adjustment by means of the included brackets. LAD Optical alignment laser LAD devices emit a visible red light laser beam with working range of up to 100 m. Their use is recommended for alignment of long-range photoelectric light grids or light curtains expecially if used in conjunction with deflection mirrors.
REER S.p.A. 10153 TORINO - Italy Via Carcano, 32 Tel. +39 011 2482215 Fax +39 011 859867 www.reer.it info@reer.it 8946158 NORSTAT INC. 300 Roundhill Dr. Rockaway, NJ 07866 Tel: 973-586-2500 Fax: 973-586-1590 www.norstat.
