User Manual

INSTALL OR ADJUST GAS SPRINGS
NORSAP 1800
1
4
3
3
1
2
NS 1800 Standard
Backrest - GAS-088
w/ GASDEL-024
Back crib - GAS-091
Front crib - GAS-091
w/ GASDEL-023
Seatpan - GAS-092
w/ GASDEL-024
Seat -GAS-092
w/ GASDEL-023
4
To remove a Gas springs for the seat movement,
follow the instruction on how to remove Seat cushion
and Standard armrest cushion.
The Gas spring(s) are located under the seat cushion.
Secure all screws and parts on a clean and so surface.
Aer removing the Seat and Standard armrest
cushion, the operation may require to remove the
Standard armrest, Circular armrest lidd and cover if
replacing the Hydraulic release buons.
NOTE: Do not use pliers without any so protection
when holding the piston for the release buon.
Any marks on the piston may cause loss of preassure
and the dedicated Gas spring will not be lock or release.
Locate which Gas spring that needs to be replaced.
Follow the hydraulic tube to or from the armrest, and
remove the bracket located in the armrest.
Remove the Gas spring with the release cap.
Note which order washers and nuts are mounted in,
before unscrewing the the Gas spring and release cap.
2
2
Description Gas springs
GAS-088 - 085-273 / 500N
GAS-091 - 085-273 / 300N
GAS-092 - 090-296 / 50N
Description Release caps
GASDEL-023 - 1000 mm
GASDEL-024 - 1200 mm