Installation Guide

GLASS DOOR MERCHANDISERS
▲ Check to see if contents are blocking
the air duct.
▲ Check the temperature controller for
possible incorrect temperature setting.
▲ Check to see if refrigerant charge is low.
▲ Make sure the door is completely
closed.
NOT INTERIOR LIGHT
▲ Turn off the light switch and turn it on
again.
▲ Make sure the bulb is correctly inserted
into the sockets.
▲ Check the bulb, and replace it if blown.
UNIT NOISY
▲ Make sure to install the unit on level
surface.
▲ Make sure to maintain the minimum
clearance of 6” from the wall.
▲ Check for the loose parts or mounting.
▲ Make sure the tubing is free from any
contact to avoid tubing rattle.
CONDENSATION ON CABINET
AND/OR FLOOR
▲ Reduce the relatively humidity in the
area where the unit is installed.
▲ Gasket on door or head section is not
sealing properly. Repair or replace
gasket as necessary.
4