Use and Care Manual

■ Select a location away from heat and moisture-generating equipment
－ high ambient temperature will cause the compressor to overwork,
leading to higher energy bills and gradual breakdown of the unit.
－malfunction due to high ambient temperature will void warranty
ELECTRIC INSTALLATION & SAFETY
INFORMATION
• If the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
• Lamps must be replaced by identical lamps only.
ELECTRICAL INSTRUCTIONS
A. Before your new unit is connected to a power supply, check the incoming
voltage with a voltmeter. If anything less than 100% of the rated voltage for
operation is noted, correct immediately.
B. All units are equipped with a service cord, and must be powered at proper
operating voltage at all times. Refer to cabinet data plate for this voltage.
WARNING: Compressor warranties are void if compressor burns out due to
low voltage.
WARNING: Power supply cord ground should not be removed!
WARNING: Do not use electrical appliances inside the food storage
compartments of the appliances unless they are of the type recommended by
the manufacturer.
NOTE: To reference wiring diagram, remove front louvered grill,wiring diagram
is positioned on the inside cabinet wall.
SETUP
STANDARD ACCESSORIES
DRAWER REMOVAL & INSTALLATION