Installation Manual

1
2
Operation Screen Display Description
Change the way the units of temperature and ow rate are displayed on the screen (standard vs. metric).
1) In the initial settings menu
select “[°F / gal]
[°C / L]”.
2) Press the
button.
1) Use the buttons to select
the unit “[°F / gal] “or “[°C / L]”.
2) Press the
button to set
the units to be displayed.
3) The display will say “Set complete”
once an option is chosen.
* You may use the button to
return to the previous menu at any
time.
1
1) Disconnect Power to all heaters and system controller in
multi-unit system.
2) Wait 10 seconds or more.
3) Reconnect power.
After nishing the Initial Settings.
─13─