Install Instructions

- 6 -
4. Choosing Installation Site
This product needs to be installed in a place where it can connect to the wireless router.
If the wireless router is already installed, refer to the “Recommended installation conditions” below, choose an installation
location, and then follow the directions under "Checking the installation location's signal conditions". Then, check that this
product can communicate with the wireless router from your chosen installation location.
If the wireless router is not installed, conrm the location that the wireless router is to be set up, and then install this
product in a place that meets as many of the "Recommended installation conditions" as possible.
<Recommended installation conditions>
1. In a place where the wireless router (or wireless range extender) can be seen from this product installation location.
2. Install this product in a place absent of any obstructing structural members such as metal panels (including
insulating aluminum sheet), between this product and wireless router.
3. Install this product so that it is closer to the wireless router than to the heater.
4. Avoid buildings that have metal structural members (including steel reinforced concrete).
5. Install in a place free of a strong magnetic eld, static electricity, and signal interference (avoid a location close to a
microwave oven, for example).
6. Install this product and wireless router on the same oor.
7. Do not enclose this product.
8. Install this product in a place more than 3.28ft (1m) height above the oor.
* When installing in a location with an unstable signal environment, move this product and wireless router closer
together or install a wireless range extender between this product and wireless router. On how to connect the
wireless range extender, refer to the user's manual of it.
* This product's wireless channels are from 1 to 11. Set the wireless router wireless channel to automatically select
a channel or set it to one of the 11 channels. This product will not work when the wireless channel is xed to
channel 12 or 13.
Checking the installation location's signal conditions
If the wireless router is already installed, check the signal condition where this product is to be set up, by the signal
strength level with a smartphone or tablet device. Check the signal strength level is more than stable "2" (recommended
level is more than "3"), with the smartphone or tablet device. If you do not have a smartphone or tablet device ask
the owner to check the signal strength level. Since this product will be installed on a wall, placing a smartphone or
tablet device close to the wall and check the signal strength level.
* The way to connect this product to the network(is outside of installation) is explained in the Owner's Guide.
Check the Signal Strength Level
In the left gure, the wireless router A, B, C, or E is optimal.
The wireless router D is not optimal, change the location of the wireless router or
this product, or install the wireless range extender, to improve signal conditions.
The screen display is an example.
The display may vary depending on
the type of smartphone or tablet device.