Install Instructions

- 10 -
Connecting of Remote Cord to Heater
● Unit has Wire Terminal Block for Remote Cord
Connect the remote cord to the unit's wire terminal block (This wire terminal block has no polarity).
Refer to the unit's installation manual for the location of the unit's wire terminal block and how to install.
(The Unit's installation manual can be downloaded from the Noritz support website.
http://support.noritz.com/)
Example of connection to the wire terminal block are shown below.
Do not connect the remote cord to the power supply line.
This product and remote controller will be damaged.
Wire Terminal Block
Example 2: Wire Terminal Block outside the Unit