Owner's Guide

9
Description of each LED condition
LED condition Description
During Normal condition
Status
（
RED
）
ON The system is normal.
Blinking
When there is an error somewhere in the system. ( page 22)
Unit
（
RED
）
ON Connected to the unit.
OFF While checking connection with the unit.
Blinking Lost connection with the unit. (
page 22)
Router
(
YELLOW
)
ON Connected to the wireless router.
OFF While checking connection with a wireless router.
Blinking Lost connection with the wireless router. (
page 22)
Server
（
GREEN
）
ON Connected to the server.
OFF While checking connection with the server.
Blinking Lost connection with the server. (
page 22)
Router & Server OFF When wireless LAN is disconnected. ( page 11)
During any button operation (when pressing any buttons, LED’s show each pattern)
All LEDs
6 Blinks
When this product setting is returned to factory default.
(
page 11)
5 Blinks During WPS mode
2 Blinks During AP mode
OFF When this product is rebooted. (
page 11)
During Signal Strength Check Mode
Status
（
RED
）
3 Blinks
During Signal Strength Check Mode (
page 10)
Indicates Signal Strength with each LED
（
Unit, Router and Server
).
Description of each LED condition
Four LEDs show current system status.
There are three display modes: Normal, Settings and Signal Strength Check Mode.
Status LED Unit, Router, Server LED