Owner's Guide

20
■
Hardware checking points after setup
3
The NORITZ CONNECT home screen appears.
This product's setup is complete.
Close the front cover securely.
Using your smartphone, you can browse the
usages or remote control the unit.
Check!!
Check!!
If the connection was unsuccessful, check the following items, and then try
again "3rd step: Pair the product to your smartphone".
• Is the wireless router WPS function activated?
Solution:
Check the wireless router user's manual and then operate the wireless
router's "WPS" button.
• Is the signal strength sufciently strong?
Solution: Move the wireless router closer and then establish a connection.
• After completing the setup, switch to this product's Signal Strength Check Mode,
and check the signal strength is "Good" or "Enough". (
page 10)
• You can adjust Status LED brightness level.
Refer to the Status LED brightness settings. (
page 11)
If you cannot check the usage status list and do
remote operation from your smartphone, try again
"3rd step: Pair the product to your smartphone".
( page 16)
NORITZ CONNECT
home screen
Setting up this product - 5