Owner's Guide

11
■
Dip Switch settings
Clear settings
To return this product settings to factory default,
press and hold the WPS, AP and MODE buttons
simultaneously for 10 seconds or more.
During clearing settings, all LEDs are 6 Blinks.
Cleared items: SSID, Key and brightness of
Status LED.
Reset (Reboot)
Use this if this product does not operate correctly.
note) This product keeps current settings.
1.
Press and hold the RESET button for 5 seconds
or more, all LEDs turn OFF.
2. All LEDs turn ON and this product starts
the connection to "Unit", "Router" and "Server".
Press and hold 5 seconds or more
Press and hold 10 seconds or more
Status LED brightness settings
The brightness can be changed to 3 different
levels when pressing the MODE button.
Low
-
> Medium(default)
-
> High
-
> Low
Set to your desired brightness.
* Do not look directly at Status LED.
Items Description of function and operation
Wireless
LAN
setting
#3 OFF
(default)
This product is connected to wireless LAN.
ON This product is disconnected from wireless LAN.
note) This product keeps connection information.
Remote
operation
setting
#4 OFF
(default)
Operating the heater by Smart Device's App.
ON Cannot operate the heater by Smart Device's App.