Owner's Guide
10
How to Use
■
Button Operations
Connection Methods
Other Settings
Signal Strength Check Mode
1.
Press and hold the MODE button for 3 seconds
or more, it alternates between Signal Strength
Check Mode and Normal condition mode.
2. Status LED is blinking 3 times during the Signal
Strength Check Mode.
3.
During the Signal Strength Check Mode, the
signal strength is displayed with the Unit, Router
and Server LEDs.
Press and hold 3 seconds or more
Press and hold 3 seconds or more
Press and hold 3 seconds or more
Activate WPS Mode
To activate the WPS Mode, press and hold the
MODE button for 3 seconds or more to connect
this product to the wireless router.
During WPS Mode, all LEDs will blink 5 times.
To deactivate the setting, press and hold the WPS
button for 3 seconds or more or leave it for 2 minutes.
Activate AP Mode
To activate the AP Mode, press and hold the
AP button for 3 seconds or more.
During AP Mode, all LEDs will blink 2 times.
You can directly connect to a smartphone or
tablet device and congure this product settings
with the NORITZ CONNECT App.
To deactivate the AP Mode, press and hold the AP button
for 3 seconds or more or leave it for 30 minutes.
* To return to the normal condition, press
and hold the MODE button for 3 seconds
or more, or leave it for 30 minutes.
3 BlinksON
Unit
ON
ON
ON
OFF
ON
ON
OFF
OFF
ON
OFF
OFF
OFF
Router Server
Good
No Good
Enough
Weak