Install Instructions

Changing Other Features

Adjusting the Temperature / Water Quantity Display

Note: The setting must be done within the rst 10 minutes of connecting electrical power to the water heater.

Table of Setting Items

Item Choices (factory defaults shaded)

Celsius/Fahrenheit

display mode.

°F (Fahrenheit) / gal °C (Celsius) / L

Display

Power On/Off Button

ENTER Button

Setting Procedure

1. Turn the water heater off by pressing the Power On/Off Button on the remote controller.

2. Disconnect, then reconnect electrical power to the water heater.

3. Press the MENU Button inside the cover, select "Initial settings" using the ▲/▼ Buttons.

4. Press the ENTER button, the "Initial settings" screen appears on the display.

5. Select "[°F / gal] <

----

> [°C / L]" using the ▲/▼ Buttons.

6. Press the ENTER Button and select either [°F / gal] or [°C / L] using the ▲/▼ Buttons.

7. Press the ENTER Button, and "Set complete Please wait..." appears on the display for 5seconds

and the "Initial settings" screen appears on the display.

8. To conrm the setting, turn the water heater on by pressing the Power On/Off Button on the remote

controller.

Remote Controller

▲/▼ Buttons

MENU Button