Use and Care Manual

22
(Display when recirculation is set to ON)
Manually Starting Recirculation
Operation
For “System [ Rcrc ]”
Recirculation operation can be manually stopped or
started using this procedure.
3. Press the ENTER button.
5. Press the ENTER button.
4. Select “Recirc on/off” using the / buttons.
2. Press the MENU button inside the cover, select
“Recirc menu” using the / buttons.
Operation
• Display “Stopping recirc operation” when the
recirculation is set to OFF.
• If the display is left untouched for
approximately 20 seconds without pressing
the ENTER button, the setting will be
completed. The home screen will be restored.
The screen returns to the previous screen.
Manually Starting Recirculation Operation
(e.g. 110°F)
1. The Power button is ON.
• The Power indicator is displayed.
• The previously set hot water supply
temperature is shown.