Instructions / Assembly
12
7.
Installation
Mounting the Water Heater to the wall
• The weight of the device will be applied to the wall. If the strength of the wall is not
sufcient, reinforcement must be done to prevent the transfer of vibration.
• Do not drop or apply unnecessary force to the device when installing. Internal parts may
be damaged and may become highly dangerous.
• Install the unit on a vertical wall and ensure that it is level.
• When installing with bare hands, take caution to not inict injury.
• Be careful not to hit electrical wiring, gas, or water piping while drilling holes.
CAUTION
Be sure to do
2. Hang the water heater on the Wall Mounting Bracket.
Mounting Bracket
(Upper)
Anchoring
Screw
Wall Mounting Bracket
Hang
1. Drill holes for the Wall Mounting Bracket.
Afx the Wall Mounting Bracket securely to the
wall by 5 screws.
Ensure that it is leveled, and it can support the
weight of the water heater.