User Guide

25
How to use Control Panel - User Mode
Chapter 3. – Unit Operation
Unit Setting Mode
1. After entering ‘User Mode’ the rst item
displayed will be [A:GA].
3.Press the ‘Dial Button’ and ‘GAL’ will be
blinking. Turn the ‘Dial Button’
counter-clockwise so ‘LIt’ is blinking.
*
GAL = GPM / °F
*
LIt = LPM / °C
4. Push the ‘Dial Button’ to save the setting
and return to ‘User Mode’.
2. Press the ‘Dial Button’ and ‘GAL’ will display on the
control panel.
Screen Display Operation Description
Unit : Gallon & Fahrenheit
All of the units shown on the display screen are GPM & °F
Unit : Liter & Celsius
All of the units shown on the display screen are LPM & °C
9. ‘Unit’ Setting [A:GA]
- Refer to page 22 for directions on how to enter ‘User Mode’.