Manualshelf

NR83 Installation Manual

ManualsBrandsNoritz ManualsWater HeatersBNR83C - 5.0 GPM at 60° F Rise - 85% TE - Gas Tankless Water Heater - Concentric - Builder's Pack
19202122232425262728
22
Changing Other Features
Adjusting the Temperature Display
Note: The setting must be done within the rst 10 minutes of connecting electrical power to the water heater.
Table of Setting Items
Item No.
Item Choices (factory defaults shaded)
12
Celsius/Fahrenheit
display mode.
°F (Fahrenheit) °C (Celsius)
Display
Power On/Off Button
Flow Meter Alarm Set buttton
Setting Button
Setting Procedure
1. Turn the water heater off by pressing the Power On/Off Button on the remote controller.
2. Disconnect, then reconnect electrical power to the water heater.
3. Press the Flow Meter Alarm Set Button and hold it in for 2 seconds or more.
4. Press the Flow Meter Alarm Set Button until the remote controller displays item number "12".
5. Press Setting Button " " or " " to change the display units to either °F or °C.
6. To conrm the setting, turn the water heater on by pressing the Power On/Off Button on the
remote controller.
Remote Controller