Use and Care Manual

e.g. EZ111DV
Vent Cap
Exhaust Flue
Vent Cap
Top Plate of the unit
e.g. EZ111DV
Band
Screwdriver
-Flat head
-Box wrench
(5/16")
Screw B
(Short)
e.g. EZ111DV
Insert the Vent Cap’s ue into the Exhaust Flue of the
unit.
2
Secure the Band of the Unit Exhaust Flue from the
window of the Vent Cap.
Only tighten by a hand screwdriver. (No Drills)
(The tightening torque shall be between 16 and 20 in
lb.)
4
Secure the Vent Cap and Bracket using Screw B.
5
Remove the Front Cover of the unit and change the
DIP switches to Outdoor setting in accordance with
the unit’s Installation Manual.
Then re-secure the Front Cover of the unit.
9
Insert the Vent Cap until the Vent Cap touches the top
plate of the unit.
3
Secure the Access Panel to the Vent Cap using Screw B.
6
Install the Weather Guard around the Condensate
Container.
7
Secure the Weather Wrap around the Weather
Guard.
8
Weather Guard
Drain pipe
e.g. EZ111DV
e.g. EZ111DV
Weather Wrap