manual

1716
ENGLISH
4 Clean the razor after each use (see
chapter 'Cleaning').
C 5 Put the Protective Cap on the razor to
protect razor heads.
Replace your Philips Norelco razor heads (model
#HQ8) once a year for optimal shaving results.
Trimming
To groom sideburns and moustache:
1 Turn razor ON.
C
2 Push down spring-release trimmer switch.
The trimmer can be activated while the razor is
running.
C
3 Hold trimmer as shown and move in
downward strokes with gentle pressure.
C
4 Close trimmer by pressing trimmer down.
5 Turn razor OFF.
ENGLISH
Cleaning
C ◗ This symbol indicates that the razor can be
rinsed under running tap water.
◗ Always clean your razor after each use.
◗ Always switch razor OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head
assembly while motor is on.
◗ Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
◗ Do not use compressed air, abrasives,
scourers or liquids such as acetone to clean
the razor.
Cleaning the Shaving Unit
The razor heads may be quickly cleaned after
each use by rinsing with hot water: Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ Do not immerse razor in water.
◗ While rinsing razor heads, water may drip
out of the base of razor. This is a normal
occurrence.