User's Guide

Install the Nordzone™ System

Follow the steps below to replace a regular lter with the Nordzone System.

CAUTION! Voltage: Turn o󰀨 the ignition to avoid the risk of electric shock.

IMPORTANT! Matching product version: Make sure that the product version

matches the vehicle model.

1. Make sure the ignition is turned off. Locate the filter compartment. The location differs

depending on vehicle model. Consult the service manual of the car if necessary.

2. Remove the cover(s), if any, and the inner lid of the filter compartment. Use the

screwdriver if necessary.

3. Properly dispose of the used air filter.

4. Replace the regular filter with the Nordzone System.

CAUTION! The particle charging unit has sharp tips that may cause minor injury if

not observed.

IMPORTANT! Make sure placement is according to the arrows.

5. Drill a hole in the inner lid according to the attached drilling template.

6. Unscrew the nut on the particle charging unit and pass the cable of the filter through the

hole of the lid. Attach the lid and screw the nut back in its position.

IMPORTANT! Make sure that the newly drilled hole does not have any sharp edges

that may damage the cable.