Owner manual

Appendix A 9-7
VID Class Format Name and Description
102 SV A[30] MachineID. The machines Model number and Serial number. The
MachineID format is: Model SNXXXXX . The Model field is
fixed at twenty characters. The Serial Number field is fixed at ten
characters and contains up to five characters in the serial
number. Spaces pack any remaining space to the right of both
fields.
103 SV A[30] PPDirectory. The directory path holding the Process Programs.
The format is: vol:\dir1[\dir2[\dir3]]. Brackets indicate optional
directory levels. The volume indicator is a single letter.
104 SV A[12] EventLogFilename. The name of the file holding the event
records log. The DOS 8.3 file name format is used. There are up
to eight characters reserved for the name and up to three
characters for the extension. The name and extension are thus
separated by a period: name.ext. The file name is left justified
within the character string and spaces pack any remaining space
to the right of the file name.
105 SV A[14] ProductionStartTime. The time stamp when production started.
The format is: YYYYMMDDhhmmss. Similar to the TIME(39)
variable format.
YYYY = year from 0000 to 9999
MM = month from 01 to 12
DD = day from 01 to 31
hh = hours from 00 to 59
mm = minutes from 00 to 59
ss = seconds from 00 to 59
106 SV U4 BoardCount. The number of boards processed since the Power
On event or since the last Process entry into the Running state.
107 DV U4 NumFailedBoards. The number of boards failed during this run.
110 SV U1 RunMode. The various types of run operations:
0 Standby
1 Production Dry
2 Production Wet
3 Passthrough
4 Manual Wet
5 Manual Dry
6 Not Ready
7 Invalid
112 EC U4 VisionFailures. The count of vision system failures counted by
the FMW SW since the Power On event or since the last change
of Process Programs. The Host may clear this variable to
measure failures during a run.
114 DV U2 BoardCycleTime. The time in seconds needed to complete
dispensing a board.
115 SV A[12] Device ID. The SECS Device ID.