User Manual

Appendix B – Collection Events B-3
Table B-1 CEID (continued)
CEID Name Description
Setup
4001 PromptedSetupStarted An operator has initiated the Prompted Setup process.
4002 PromptedSetupCompleted
The Prompted Setup Process is completed.
4003 FindNeedleXYZ An automatic needle XYZ calibration has been performed.
4004 ManualMeasureFlowRate1
A flow rate measurement for Valve 1 has been initiated by an
operator.
4005 ManualPurgeNeedle1 A needle purging of Valve 1 has been initiated by an operator.
4006 OperationLevelChanged The system operation level has been changed.
4007 PasswordsModified The system operation level passwords have been modified.
4008 ManualMeasureFlowRate2
A flow rate measurement for Valve 2 has been initiated by an
operator.
4009 ManualPurgeNeedle2 A needle purging of Valve 2 has been initiated by an operator.
4010 ScaleRead1
The Scale has been read after Valve 1 has dispensed material
during the
Dispense Weight Verification Procedure. Data
Variable ScaleMeasurement1 holds the scale measurement.
4011 ScaleRead2
The Scale has been read after Valve 2 has dispensed material
during the
Dispense Weight Verification Procedure. Data
Variable ScaleMeasurement2 holds the scale measurement.
4012 FlowRate1Updated
The Flow Rate for Valve 1 has been updated (Data Variable
FlowRate1 has been modified).
4013 FlowRate2Updated
The Flow Rate for Valve 2 has been updated (Data Variable
FlowRate2 has been modified).
4020
DispenseWeightComplete
Collection event that is generated upon completion of all
dispenses during the Dispense Weight Verification routine.
See related data variables:
DWVRESULT
DWVVALVE
DWVTARGET
DWVDISPENSES
DWVTARGETRANGE
DWVTARGETMINLIMIT
DWVTARGETMAXLIMIT
DWVMEASUREDRANGE
DWVMEASUREDAVG