Manual

Appendix B 10-3
CEID Name Description
3012 ConveyorCodeDownloaded2 A new conveyor control code has been
downloaded into the Conveyor 2 controller.
Setup
4001 PromptedSetupStarted An operator has initiated the Prompted Setup
process.
4002 PromptedSetupCompleted The Prompted Setup Process is completed.
4003 FindNeedleXYZ An automatic needle XYZ calibration has been
performed.
4004 ManualMeasureFlowRate1 A flow rate measurement for Valve 1 has been
initiated by an operator.
4005 ManualPurgeNeedle1 A needle purging of Valve 1 has been initiated by
an operator.
4006 OperationLevelChanged The system operation level has been changed.
4007 PasswordsModified The system operation level passwords have been
modified.
4008 ManualMeasureFlowRate2 A flow rate measurement for Valve 2 has been
initiated by an operator.
4009 ManualPurgeNeedle2 A needle purging of Valve 2 has been initiated by
an operator.
Run Time
5001 HeaterMonitorTimeout The heaters at the dispensing location failed to
reach the specified temperature range within the
timeout period.
5002 HeaterMonitorSkipped The operator has selected to skip the
temperature monitoring and proceed to
dispensing.
5003 HeaterMonitorAborted The operator has selected to abort the
temperature monitoring and aborted the run.
5004 PeriodicPurge1 A periodical purging of the needle for Valve 1 has
been performed.
5005 PeriodicFlowrateMeasurement
1
A periodical flow rate measurement for Valve 1
has been performed.
5006 PotLifeWarning1 The pot life of the dispensing material for Valve 1
has reached a warning level.
5007 PotLifeExpire1 The pot life of the dispensing material for Valve 1
has expired.
5008 AwaitingRecoveryCommand The system has queried the operator to recover
the previous run.
5009 OperatorAckedTerminalMsg The operator acknowledged a terminal message.