Manual

Appendix B 10-1
10. Appendix B -- Collection Events
The following collection events exist at the Equipment.
Table 10-1 CEID
CEID Name Description
Note: 1 -
65 are
standard
GEM
1 ControlStateChange This event is triggered when there is a change in
control state.
2 ProcessStateChange This event is triggered when there is a change in
process state.
3 GemPPChangeEvent This event is triggered when the operator creates,
changes, or deletes a process program.
4 OperatorCommand Sent whenever the operator attempts to control the
machine while in the Online - REMOTE state.
5 AbortStarted This event is triggered when an abort request was
acknowledged and the abort process begins.
6 AbortCompleted This event is triggered when the abort process is
complete.
7 GemBadDownloadEvent After the host downloads a recipe to the equipment
upon the equipment’s request, the equipment
checks the recipe for accuracy. If the process
program is invalid, this event is triggered.
8 GemControlStateLOCAL Sent when Control State changes to LOCAL.
9 GemControlStateREMOTE Sent when Control State changes to REMOTE.
14 StartCmd Sent when the operator clicks the GO button from
Teach Window or Run WIndow.
15 StopCmd Sent when the operator clicks the STOP button from
Teach Window or Run WIndow.
16 PauseCmd Sent when the operator clicks the PAUSE button
from Teach Window or Run Window and the
equipment is in RUNNING state.
17 ResumeCmd Sent when the operator clicks the PAUSE button
from Teach Window or Run Window and the
equipment is in PAUSED state.
18 AbortCmd Sent when the operator clicks the ABORT button
from Teach Window or Run WIndow.