Manual

Appendix A 9-5
VID Class Format Name and Description
40 DV A[0..12] PPCHANGENAME. PPID of the Process Program most recently
created, changed, or deleted. This variable is the DOS 8.3 file
name of the recipe changed. It includes the extension RCP.
41 DV U1 PPCHANGESTATUS. The action (create, change, delete) taken
on a Process Program
1 = Created
2 = Changed
3 = Deleted
42 EC U1 OFFLINESUBSTATE. The default (power-up) offline substate of
the Control State Model.
1 = Equipment Off-Line
2 = Attempt On-Line
3 = Host Off-Line
43 EC U1 ONLINEFAILED. The default Control State transition when
Attempt On-Line fails.
1 = Equipment Off-Line
2 = Host Off-Line
44 EC U1 ONLINESUBSTATE. The default (power-up) online substate of
the Control State Model.
4 = Local
5 = Remote
46 EC U4 MAXSPOOLTRANSMIT. The maximum number of spooled
messages the equipment will send each time the Host reads the
spool. A setting of zero indicates that all spooled messages
should be sent. Refer to the description of S6F23 in the "SECS
Message Detail" section for further information.
48 SV U4 SPOOLCOUNTACTUAL. A count of the number of messages
actually present on the spool disk, adjusted for any messages
which have been overwritten or otherwise discarded.
49 SV U4 SPOOLCOUNTTOTAL. A count of the number of messages the
equipment attempted to write to the spool disk. This number
includes messages actually present on the spool disk, and also
any messages which may have been overwritten or otherwise
discarded.
50 SV A[16] SPOOLFULLTIME. The date and time at which the spool file
became full. Format is: YYYYMMDDhhmmsscc. See
description of CLOCK variable above for format details.