Manual

Machine Variable Definitions 6-3
Variable Name ID Storage
Type
Description
PREVIOUSCONTROLSTATE 35 U1 The previous Control State for the
Equipment. The values are: 1 Off-Line /
Equipment Off-Line 2 Off-Line /Attempt
On-Line 3 Off-Line/Host Off-Line 4 On-Line
Local, 5 On-Line Remote.
PREVIOUSPROCESSSTATE 36 U1 The previous Process State for the
Equipment. The values for this state can be
found in Appendix A.
PROCESSSTATE 37 U1 The current Process State for the
Equipment. The values for this state can be
found in Appendix A.
ProductionStartTime 105 A[14] The time stamp at which the last production
run began. See Appendix A for the format.
RunMode 110 U1 The specific type of runtime operation
being conducted; dry run, production run,
passthrough, or prototype test run.
SOFTREV 38 A[6] The software revision number in ASCII
code.
SoftwareID 101 A[20]
FmNT name and version code.
SPOOLCOUNTACTUAL 48 U4 A count of the number of messages
actually present on the spool disk, adjusted
for any messages which have been
overwritten or discarded.
SPOOLCOUNTTOTAL 49 U4 A count of the number of messages the
equipment attempted to write to the spool
disk. This number includes messages
actually present on the spool disk, and any
messages which may have been
overwritten or discarded.
SPOOLFULLTIME 50 A[16] The date and time at which the Spool file
became full. The format is :
YYYYMMDDhhmmsscc.
SPOOLLOADSUBSTATE 51 U4 The current state within the SPOOL LOAD
super-state. 1 - Spool Active, 2 - Spool
Inactive.
SPOOLSTARTTIME 52 A[16] See description of CLOCK variable for this
format.
SPOOLSTATE 53 U4 The current Spool State within the POWER
ON super-state. 3 - Purge Spool 4 -
Transmit Spool 5 - No Spool output.