Manual

SECS Message Detail 4-59
4.82 S6F24 - Request Spooled Data Acknowledge
S6F24 * H <- E
<B [1] RSDA> .
Equipment acknowledges the Host's request to either purge spooled messages or
send spooled messages to the Host.
Table 4-20 RSDA Values
RSDA Description
0x00 Normal. Equipment will start to send spooled
data or optionally purge the spool. Action
performed will depend on value for RSDC in
S6F23.
0x02 Denied. Spooled data does not exist.
4.83 S7F1 - Process Program Load Inquire
S7F1 W * H<->E
<L [2]
<A PPID> * Process Program ID
<U4 LENGTH> * Length of text
> .
PPID should be in the DOS 8.3 file name format and should include the extension
RCP.
The Sender requests permission to send a Process Program. The Process Program
may be either a Load Recipe, Process Recipe, or Parameter Table.
The Equipment always sends this Inquire/Grant transaction before sending any
multi-block S7F3. LENGTH specifies the number of bytes in the following S7F3
message, excluding SECS-I block-length bytes, block headers, and checksums.
For Host-to-Equipment transfers, this Inquire/Grant is optional. The Equipment
accepts it, but ignores it, commits no resources, and initiates no Conversation
timeout. The Equipment will accept a multi-block S7F3 even if not preceded by the
Inquire/Grant.