Manual

4-58 SECS Message Detail
4.81 S6F23 - Request Spooled Data
S6F23 W * H -> E
<U1 RSDC> .
The Host sends this message to start the transfer of spooled messages from the
Equipment to the Host, or to delete the contents of the spool file, depending on the
value of RSDC.
When the Host requests the spooled messages (RSDC is zero), the Equipment will
send messages according to EC "MaxSpoolTransmit". All messages are sent from
oldest to newest, and once the message is successfully sent, it is removed from the
spool. If MaxSpoolTransmit is zero, all messages will be sent one at a time until the
last message has been delivered. If MaxSpoolTransmit is set to a non-zero value, the
Equipment will send the lesser of MaxSpoolTransmit or messages left in spool. If in
this case the Equipment sends MaxSpoolTransmit messages, and messages remain in
the spool, the Equipment will wait for another S6F23 to deliver the next messages.
If the Host sends S6F23 with RSDC set to one, this will be interpreted by the
Equipment as a request to purge the spool.
Table 4-19 RSDC
RSDC Description
0 Transmit spooled messages.
1 Purge spooled messages