Manual

SECS Message Detail 4-51
4.69 S6F11 - Event Report Send
S6F11 W * H<-E
<L [3]
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L
<L [2]
<U4 RPTID> * Report ID
<L
<V> * Variable Value
...
>
>
...
>
> .
This message is the "normal" message that the Equipment uses to report events. In
order for this message to be used, the Equipment Constant "ConfigEvents" must be
set to "1".
A Collection Event has occurred at the Equipment. The Host has enabled event
reporting for this CEID (see S2F37). The Host has set the Equipment Constant
RpType to "False" (normal report format desired). The Equipment sends one or
more Event Reports which the Host has previously linked to that CEID (see S2F35).
Each report contains specific Variables which the Host has previously defined for
that Report (see S2F33).
The Equipment generates a value for DATAID to uniquely identify this
Conversation. If S6F11 is multiblock, the Equipment first sends the S6F5/S6F6
Inquire/Grant transaction, and the DATAID in S6F11 will match DATAID in S6F5.
If the CEID is enabled, but no Reports are linked to this CEID, S6F11 has the
following special format:
S6F11 W * H<-E
<L [3]
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L>
> .