Manual

4-44 SECS Message Detail
4.58 S5F72 - Alarm Report Block Acknowledge
S5F72 * H->E
<L> .
The Host acknowledges Alarm Report. This Equipment ignores the data portion of
S5F72.
4.59 S5F73 - Alarm Report Block Acknowledge
S5F73 [W] * H<-E
<L [3]
<U4 ALID> * ALID - Alarm ID
<BOOLEAN ASTAT> * T = Alarm On,
F = Alarm Off.
<A [16] 'YYYYMMDDhhmmsscc'> * TIMESTAMP
>.
 NOTE This message is provided only for compatibility with older Host
computers which support GEM 3.1. (See section 2.7.2, "Gem
Configuration".)
In order for this message to be used, the Equipment Constant "ConfigAlarms" must
be set to "2".
The GES-1993 reports that an alarm condition has changed.
ALID identifies the Alarm.
ASTAT value is "True" (Non-zero) if this alarm is currently On (Unsafe), or "False"
(Zero) if it is currently Off (Safe).
TIMESTAMP indicates the date and time of the alarm change.
Equipment Constant "WBitS5" controls whether the Equipment sends S5F73 with
W-Bit "1" (Reply Expected) or "0" (No Reply Expected).
4.60 S5F74 - Alarm Notification Acknowledge
S5F74 * H->E
<B [1] ACK5> .
The Host acknowledges Alarm Report. This Equipment ignores ACKC5.