Manual

SECS Message Detail 4-39
Equipment Constant "WBitS5" controls whether the Equipment sends S5F1 with W-
Bit "1" (Reply Expected) or "0" (No Reply Expected).
4.50 S5F2 - Alarm Acknowledge
S5F2 * H->E
<B [1] 00>. * ACK5 - Alarm Acknowledge
The Host acknowledges the Alarm Report. This Equipment ignores the ACKC5.
4.51 S5F3 - Enable/Disable Alarm Send
S5F3 [W] * H->E
<L [2]
<B [1] ALED> * ALED - Alarm Enable/Disable
Code
<U4 ALID> * ALID - Alarm ID
>.
The Host commands the Equipment to enable or disable (depending on ALED)
reporting for the specified Alarm ID in S5F1, S5F8, S5F71, and S5F73.
Table 4-16 ALED Values
ALED Description
0x80 Enable sending alarm.
0x00 Disable sending alarm.