Manual

4-26 SECS Message Detail
4.41 S2F41 - Remote Command with Parameters
S2F41 [W] * H->E
<L [2]
<A RCMD> * Remote command string
<L
<L [2]
<A CPNAME> * Command Parameter Name
<CPVAL> * Command Parameter Value
>
...
>
>.
The Host sends a command with parameters to the Equipment. If a command has no
parameters, S2F41 has the following format:
S2F41 [W] * H->E
<L [2]
<A RCMD> * Remote Command String
<L>
>.
The GES-1993 ignores case when performing validity checks on the RCMD and
CPNAME strings. The ASCII strings described below may be sent in any
combination of upper and lower case characters.
RCMD String Function
“START” Start a Process Program
“STOP” Stop a running Process Program
“ABORT” Abort a running Process Program
“PAUSE” Pause a running Process Program
“RESUME” Resume a paused Process Program
“REMOTE” Switch equipment to remote state
“LOCAL” Switch equipment to local state
The Host may optionally set the W-Bit to "1" in S2F41. If so, the Equipment replies
with S2F42.