Owner's manual

4-10 SECS Message Detail
4.2.15 S1F66 - Connect Request Acknowledge
NOTE This message is provided only for compatibility with Host computers which support an
older version of GEM.
If the Host sends S1F65, Format 1, the Equipment replies S1F66 using the following format:
S1F66 * H<-E
<L
<B [1] 00> * COMMACK
<L
<A MDLN>
<A SOFTREV>
>
> .
If the Host sends S1F65, format 2, the Equipment replies S1F66 using the following format:
S1F66 * H<-E
<B [1] 00> . * COMMACK
The Host sends this message using the following format:
S1F66 * H->E
<L
<B [1] 00>
<L>
> .
The Equipment also accepts the following form of this message.
S1F66 * H->E
<B [1] 00> . * COMMACK
The Equipment always sends the value 0x00 for COMMACK.
In messages received from the Host, COMMACK value 0x00 indicates acceptance of the connect
request. Any other values indicates refusal.