Owner's manual

Appendix F - Variables Grouped by Fluidmove Activity F-163
Table F.66-1 Additional Configuration Parameter Variables (Continued)
Variable Name ID
Storage
Type
Class
Related
CEID
Description/Default
c_AutoConveyorWidthEnable2 6678 A[4] EC None Enable automatic conveyor width 2
c_ConfirmACWMove 6113 A[4] EC None Confirm move to taught width
c_ConfirmACWMove2 6679 A[4] EC None Confirm move to taught width 2
c_AutoConveyorWidthClearance 6756 A[30] EC None Automatic conveyor width clearance
c_AutoConveyorWidthClearance2 6757 A[30] EC None Automatic conveyor width clearance 2
c_ConveyorWidthSpeed 6754 A[30] EC None Conveyor width speed
c_ConveyorWidthAccel 6755 A[30] EC None Conveyor width accel
Heater Configuration
c_ControlType_H1 6018 A[20] EC None Heater 1 control type
c_CpH_Enabled 6523 A[4] EC None Enable control process heat
c_AutoPurgeEnabled 6680 A[4] EC None Auto purge during wait
c_EnableSkipWhileWaitingforTemp 6015 A[4] EC None Enable skip during wait for temp
c_EnabledPurgeBeforeResume 6014 A[4] EC None Enable purge before resume
c_TurnheatersoffwhenFmntexits 6016 A[4] EC None Turn heaters off when Fluidmove exits
c_PreHeatTimerEnabled 6681 A[4] EC None Enable pre heat timer
c_DefaultPreHeatTime 6683 A[4] EC None Default pre heat time
c_WarnHeaterFileChange 6684 A[4] EC None Warn if heater file changed
Setup Dispenser
c_MotionControllerType 6057 A[20] EC None Motion controller type
c_ScaleFMWPerUnit 1552 A[30] EC None FMW units/encoder step
FirmwareRev 1553 F8 SV None Firmware revision
FirmwareBuild 1554 A[40] SV None Firmware build
c_RunRecoveryEnabled 6685 A[4] EC None Run recovery enabled
c_RecoveryPromptPosition 6686 I4 EC None Recovery instruction position