Owner's manual

F-162 Appendix F - Variables Grouped by Fluidmove Activity
Table F.66-1 Additional Configuration Parameter Variables (Continued)
Variable Name ID
Storage
Type
Class
Related
CEID
Description/Default
Setup Conveyor 2
c_ConveyorControlType_C2 6743 A[20] EC None Conveyor 2 control type
c_ConveyorMode_C2
6744 I4 EC None
Disabled = 0, Run Continuous = 1, Pass Through =
2
c_StartupFileName_C2 6745 A[60] EC None Conveyor startup filename
c_StyleType_C2 6746 A[100] EC None Conveyor style
c_BeltSpeed_C2 6747 A[30] EC None Belt speed
c_BeltAccel_C2 6748 A[30] EC None Belt acceleration
c_LongMove_C2 6749 A[30] EC None Long move
c_ShortMove_C2 6750 A[30] EC None Short move
c_Retries_C2 6752 A[30] EC None Retries
c_BackMove_C2 6751 A[30] EC None Back move
c_TwinConveyorWait_C2 6753 I4 EC None Wait for 2
nd
board time( dual conveyor)
c_ConfirmACWMove2 6679 A[4] EC None Confirm move to taught width 2
c_ConveyorWidthSpeed 6754 A[30] EC None Conveyor width speed
c_ConveyorWidthAccel 6755 A[30] EC None Conveyor width accel
Conveyor Configuration – FmConvey.ini
ClearPinsMove 1567 F8 SV None Clear pins move distance
S2RequestDelayMove 1568 F8 SV None Station 2 request delay move
S3RequestDelayMove 1569 F8 SV None Station 3 request delay move
ClearDownPinDelay 1570 F8 SV None Clear down pin delay
S3OutFirst 1571 F8 SV None Station 3 out first
Automatic Conveyor Width
c_AutoConveyorWidthEnable 6677 A[4] EC None Enable automatic conveyor width