Owner's manual

F-154 Appendix F - Variables Grouped by Fluidmove Activity
Table F.66-1 Additional Configuration Parameter Variables (Continued)
Variable Name ID
Storage
Type
Class
Related
CEID
Description/Default
c_MachineSetupMode 6000 A[20] EC None Scripted valve offset
c_ScriptedVOFileName 6001 A[60] EC None Script file name
c_CameraAssistedScripts 6002 A[4] EC None Camera assisted mode
c_UseSeviceStationData 6601 A[4] EC None Service station mode
Setup Scripts Options
c_UseScript 6255 A[4] EC None Use setup script
c_Valve1PromptedSetupScriptFile 6259 A[60] EC None Prompted setup filename
c_Valve1ChangeSyringeScriptFile 6260 A[60] EC None Change syringe script filename
c_Valve1LowFluidScriptFile 6261 A[60] EC None Low fluid script filename
Setup Runtime Preferences – Start Production
c_HomeZAxisatProd 6020 A[4] EC None Home Z at production start
c_HomeAllAxesatProd 6021 A[4] EC None Home all axis at production start
c_MoveToSystemLocation 6030 A[4] EC None Move to system location at production start
c_CheckForDisabledInstructions 6701 A[4] EC None Check for disabled instructions
Setup Runtime Preferences – Purge
c_PurgeBeforeEachRun_V1 6602 A[4] EC None Purge before each board
c_PurgeAfterEachRun_V1 6603 A[4] EC None Purge after each board
Setup Runtime Preferences – Production
c_EnableRunSetupForProduction 6025 A[4] EC None Enable run setup/production
c_LotContolEnabled 6604 A[4] EC None Enable lot control for production
c_CheckSystemAirPressure 6026 A[4] EC None Check system air pressure
c_CheckAirPressEveryInstruction 6605 I4 EC None Check air every instruction
c_ConveyorEmptyTimeLimit 6606 I4 EC None Alert if conveyor empty after time limit