Owner's manual

Appendix F - Variables Grouped by Fluidmove Activity F-125
F.49 Lane Number
LaneNumber reflects the lane number associated with the data collected during certain collection events. It is not valid for all collection events as the lane
number may refer to data currently being collected on a specific lane when a collection event for the opposite lane occurs.
See Related CEIDs in the table below for the valid collection events LaneNumber is valid for.
Table F.49-1 Lane Number – Data Variables
Variable Name ID
SECS
Type
Storage
Type Class
Related
CEIDs Description
LaneNumber 521 I4 INT DV
2001
2002
2003
2004
8000
8400
Lane number specifying what lane report data applies
to when certain collection events are triggered.
Note 1: Workpiece fiducials are not lane dependent and if LANENUMBER is reported during workpiece fiducial location collection events, it will
always reflect Lane 1. “Pattern” fiducials are lane dependent and LANENUMBER will reflect the lane in which the pattern fiducial locations are
reported.
Note 2: LaneNumber will be updated to lane “2” only when there are “USE CONVEYOR 2:” conveyor block instructions in the FMW program. It is
possible for a program to be written for both lanes without the use of these blocks (which is not recommended), in which case “LaneNumber”
will never change from lane “1” to lane “2”.