Owner's manual

F-116 Appendix F - Variables Grouped by Fluidmove Activity
Table F.46-1 CPH Air Flow - Status Variables (continued)
Status Variable Name ID
SECS
Type
Storage Type Description
AF_L2S1_Limits_Enabled 1284 A[4] ASCII
Air flow limits enabled for Lane 2 station 1.
Value will be “ON” or “OFF”.
AF_L2S1_UpperLimitOffset 1285 F8 FLT Upper limit air flow offset for Lane 2 station 1.
AF_L2S1_LowerLimitOffset 1286 F8 FLT Lower limit air flow offset for Lane 2 station 1.
AF_L2S2_Limits_Enabled 1287 A[4] ASCII
Air flow limits enabled for Lane 2 station 2.
Value will be “ON” or “OFF”.
AF_L2S2_UpperLimitOffset 1288 F8 FLT Upper limit air flow offset for Lane 2 station 2.
AF_L2S2_LowerLimitOffset 1289 F8 FLT Lower limit air flow offset for Lane 2 station 2.
AF_L2S3_Limits_Enabled 1290 A[4] ASCII
Air flow limits enabled for Lane 2 station 3.
Value will be “ON” or “OFF”.
AF_L2S3_UpperLimitOffset 1291 F8 FLT Upper limit air flow offset for Lane 2 station 3.
AF_L2S3_LowerLimitOffset 1292 F8 FLT Lower limit air flow offset for Lane 2 station 3.
AF_L1S1_SetPoint 1293 F8 FLT Air flow set point for Lane 1 Station 1.
AF_L1S2_SetPoint 1294 F8 FLT Air flow set point for Lane 1 Station 2.
AF_L1S3_SetPoint 1295 F8 FLT Air flow set point for Lane 1 Station 3.
AF_L2S1_SetPoint 1296 F8 FLT Air flow set point for Lane 2 Station 1.
AF_L2S2_SetPoint 1297 F8 FLT Air flow set point for Lane 2 Station 2.
AF_L2S3_SetPoint 1298 F8 FLT Air flow set point for Lane 2 Station 3.
Table F.46-2 CPH Air Flow - Related Configuration Variables
Data Variable Name ID
SECS
Type
Storage
Type
FmConfig.ini Entry Description
[Airflow Manager]
c_AirflowUnits 6520 I4 INT Units =
0 = scfm
1 = slpm
[Heater Manager]
c_CpH_Enabled 6523 A[4] ASCII Controlled Process Heat = Value will be “ON” or “OFF”