Owner's manual

Appendix F - Variables Grouped by Fluidmove Activity F-111
F.42 Resume – Remote Command
Resume is a remote command to resume the production run after a pause command.
SECS/GEM host sends this remote command to the client machine. The following table describes the SECS/GEM remote command and variables related
to Resume command.
Table F.42-1 Resume - Remote Command
Remote Command CEID
Related Data and
Status Variables
Description
Remote Command String = “RESUME” None None
Remote control command to resume production running after a pause
command. This command is valid if in remote mode and the program is
paused.
SECS/GEM Script for RESUME Remote Command
RESUME_CMD: S2F41 W
<L [2]
<A 'RESUME'> /* RCMD */
<L
>
> .