Owner's manual

F-110 Appendix F - Variables Grouped by Fluidmove Activity
F.41 Remote – Remote Command
Remote is a remote command to change SECS/GEM control state to “Remote” mode.
SECS/GEM host sends this remote command to the client machine. The following table describes the SECS/GEM remote command and variables related
to Remote command.
Table F.41-1 Remote - Remote Command
Remote Command CEID
Related Data and
Status Variables
Description
Remote Command String = “REMOTE” None None
Remote control command to change SECS/GEM control state to
“Remote” mode. This command is valid anytime SECS/GEM is enabled.
SECS/GEM Script for REMOTE Remote Command:
REMOTE_CMD: S2F41 W
<L [2]
<A 'REMOTE'> /* RCMD */
<L
>
> .