Owner's manual

F-108 Appendix F - Variables Grouped by Fluidmove Activity
F.39 Local – Remote Command
Local is a remote command to change SECS/GEM control state to “Local” mode.
SECS/GEM host sends this remote command to the client machine. The following table describes the SECS/GEM remote command and variables related
to Local command.
Table F.39-1 Local - Remote Command
Remote Command CEID
Related Data and
Status Variables
Description
Remote Command String = “LOCAL” None None
Remote control command to change SECS/GEM control state to “Local”
mode. This command is valid anytime SECS/GEM is enabled.
SECS/GEM Script for LOCAL Remote Command
LOCAL_CMD: S2F41 W
<L [2]
<A 'LOCAL'> /* RCMD */
<L
>
> .