Owner's manual

Appendix F - Variables Grouped by Fluidmove Activity F-107

F.38 Abort – Remote Command

Abort is a remote command used to abort the production run of the Fluidmove application.

SECS/GEM host can start this process with a remote command sent to the client machine. The following table describes the SECS/GEM remote command

and variables related to Abort command.

Table F.38-1 Abort - Remote Command

Remote Command CEID

Related Data and

Status Variables

Description

Remote Command String = “ABORT” None None

Remote control command to abort production run of the Fluidmove

application. This command is valid if the Fluidmove program is running

production.

SECS/GEM Script for ABORT Application Remote Command

ABORTAPP_CMD: S2F41 W

<L [2]

<A 'ABORT'> /* RCMD */

> .