Owner's manual

Appendix F - Variables Grouped by Fluidmove Activity F-105
DJ Offset Calibration
Script Instruction
DJ Offset Calibration
Host Command
DJOFFSETCALIB_VALVE_1: S2F41 W
<L [2]
<A 'DJ OFFSET CALIBRATION'> /* REMOTE COMMAND */
<L
<L [2]
<A 'VALVE'> /* OPTIONAL COMMAND PARAMETER NAME*/
<U2 1> /* 1 = Valve 1, 2 = Valve 2 */
>
>
> .
Collection event 3749 is issued when task is complete.
If optional command parameter is not used, valve will default to 1.
Setup Required Before Running
The DJ Offset Calibration must be performed manually the first time to setup parameters for initial dot location, dispense speed, dispense gap, and dot
finder calibration.
Note: dispense location, speed, and gap can be configured by the SECS/GEM host.