Owner's manual

F-86 Appendix F - Variables Grouped by Fluidmove Activity

F.32 Move To Front – Remote Command

Move to Front is a script command used during machine setup to move the dispense head to the front of the machine to service the valve. The SECS/GEM

host can start this process with a remote command sent to the client machine. The following table describes the SECS/GEM remote command and

variables related Move to Front command.

Table F.32-1 Move to Front – Remote Command

Remote Command CEID

Related Data and

Status Variables

Description

Remote Command String =

“MOVE TO FRONT”

---

Remote control command to start Move To Front.

3753 ce_MoveFrontLocationPass

3777 ce_MoveFrontLocationFail

Usage Scenario

The SECS/GEM host moves the dispense head by sending the remote command MOVE TO FRONT to the dispensing tool. After the move is finished,

collection event 3753 is triggered to notify the host.

SECS/GEM Scripts for Testing MOVE TO FRONT Remote Command

MOVEFRONT_DEFINE_REPORTS: S2F33 W

<L [2]

<U2 0> /* DATAID */

<L [2]

<U2 102> /* RPTID */

<U4 27> /* GEM CLOCK Test collection event */

> .