Owner's manual

F-84 Appendix F - Variables Grouped by Fluidmove Activity

F.31 Move To Center – Remote Command

Move to Center is a script command used during machine setup to move the dispense head to the center of the machine while servicing the purge and

scale. The SECS/GEM host can start this process with a remote command sent to the client machine. The following table describes the SECS/GEM remote

command and variables related Move to Center command.

Table F.31-1 Move to Center – Remote Command

Remote Command CEID

Related Data and

Status Variables

Description

Remote Command String =

“MOVE TO CENTER”

---

Remote control command to start Move To Center.

3752 ce_MoveCenterLocationPass

3776 ce_MoveCenterLocationFail

Usage Scenario

The SECS/GEM host moves the dispense head by sending the remote command MOVE TO CENTER to the dispensing tool. After the move is finished,

collection event 3752 is triggered to notify the host.

SECS/GEM Scripts for Testing MOVE TO CENTER Remote Command

MOVECENTER_DEFINE_REPORTS: S2F33 W

<L [2]

<U2 0> /* DATAID */

<L [2]

<U2 102> /* RPTID */

<U4 27> /* GEM CLOCK Test collection event */

> .