Owner's manual

Appendix F - Variables Grouped by Fluidmove Activity F-71
F.27 Teach Scale – Remote Command
Teach Scale is a script command used during machine setup to locate the XY offset of the Scale relative to the needle/Jet. The SECS/GEM host can start
this process with a remote command sent to the client machine. The following tables describe the SECS/GEM remote command and variables related
Teach Scale.
Table F.27-1 Teach Scale – Remote Command
Remote Command CEID
Related Data
Variables
Description
Remote Command String = “TEACH
SCALE”
Remote control command may include the
valve and scale name and number in the
command parameters. (SECS/GEM
S2F41 format)
No parameters will default to Valve 1,
Scale 1.
6497
6499
6525
Scale 2, Valve 2
variable is not yet
defined.
Remote control command to start Teach Scale process.
3737 ce_TeachScalePass
3764 ce_TeachScaleFail
Table F.27-2 Teach Scale – Equipment Constants
Variable Name ID
Storage
Type
SECS
Type
Related
CEID
Description
c_ScaleLocationXYZ_V1 6497 A50 EC 3737 Scale XYZ location for Valve 1.
c_ScaleLocationXYZ_V2 6499 A50 EC 3737 Scale XYZ location for valve 2.
c_Scale2LocationXYZ_V1 6525 A50 EC 3737 Scale 2 XYZ location for Valve 1.
c_Scale2LocationXYZ_V2 6542 A50 EC 3737 Scale 2 XYZ location for valve 2.