Owner's manual

Appendix F - Variables Grouped by Fluidmove Activity F-33
F.15 Remote Restart Application – Remote Command
Restart Application is a remote command to restart the Fluidmove application.
SECS/GEM host can start this process with a remote command sent to the client machine. The following tables describe the SECS/GEM remote command
and variables related Locate Service Station.
Table F.15-1 Remote Restart Application - Remote Commands
Remote Command
Related
CEID
Related Data and
Status Variables
Description
Remote Command String =
“RESTART_APPLICATION”
None None
Remote control command to restart Fluidmove application. This
command is valid if Fluidmove program is not running production.
Usage Scenario
The SECS/GEM host initiates the Restart Application process by sending the remote command to the dispensing tool.
SECS/GEM Scripts for Restart Application Remote Command
RESTARTAPP_CMD: S2F41 W
<L [2]
<A 'RESTART APPLICATION'> /* RCMD */
<L
>
> .