Owner's manual

Appendix F - Variables Grouped by Fluidmove Activity F-1
Appendix F Variables Grouped by Fluidmove
Activity
F.1 Overview
This appendix lists various Fluidmove activities that have some type of associated SECS/GEM capability.
Each activity lists associated SECS/GEM variables, events and remote commands. The SECS/GEM data
listed in this appendix is listed in previous appendices, but this appendix can be used to determine what
SECS/GEM capabilities exist for a specific Fluidmove activity.
The following abbreviations will be used:
CE
Collection Event
CEID
CEID
DV Data Variable
EC
Equipment Constant
ECID Equipment Constant ID
SV
Status Variable
This appendix covers the following topics:
Fluidmove Activity Page
F.2
Setup Level Variables ......................................................................................... F-4
F.3 Lot Level Variables.............................................................................................. F-5
F.4 Carrier Level Variables and Equipment Constants ............................................. F-6
F.5 Configuration Parameter Download Rejection Variables.................................... F-9
F.6 Configuration Change Notification .................................................................... F-10
F.7 Recipe Change Notification .............................................................................. F-12
F.8 Program Instruction Variables ........................................................................... F-13
F.9 Local Machine Offsets (LMO) - Workpiece Origin ............................................ F-27
F.10 LMO Workpiece Align – Remote Command ..................................................... F-29
F.11 LMO Height Sense ............................................................................................ F-30
F.12 Dispense Head Linear Fluid Sensor Level Percent .......................................... F-31
F.13 Dispense Head Linear Fluid Level State........................................................... F-31
F.14 Limited Start Number of Runs ........................................................................... F-32
F.15 Remote Restart Application – Remote Command ............................................ F-33
F.16 Calibrated Process Jetting (CPJ) – Remote Command ................................... F-34
F.17 Flow Rate Calibration – Remote Command ..................................................... F-37
F.18 Dispense Weight Verification (DWV) – Remote Command .............................. F-42
F.19 DJ9K Vacuum Assisted Prime – Remote Command ........................................ F-46