Owner's manual

Table E-1 SECS/GEM Remote Commands (Continued)
E-4 Appendix E - SECS/GEM Remote Commands
Remote Command Description
Optional
Parameters
Return Status Code Description
“LOCAL”
Change SECS/GEM control state to
“Local” mode
See Appendix F – “LOCAL” remote
command
None 0x00 Command received successfully and is executing
“LOCATE SERVICE STATION”
Locate Service Station
See Appendix F – “LOCATE
SERVICE STATION” remote
command
None
0x00 Command received successfully and is executing
0x01 Command invalid in current configuration
0x02 Not in Production window
0x40 Not in REMOTE mode
0x41 Program running – cannot execute command
“MOVE HOME”
Move dispense head to home
location
See Appendix F – “MOVE HOME”
remote command
None
0x00 Command received successfully and is executing
0x01 Command invalid in current configuration
0x02 Not in Production window
0x40 Not in REMOTE mode
0x41 Program running – cannot execute command
“MOVE TO CENTER”
Move dispense head to center
location
See Appendix F – “MOVE TO
CENTER” remote command
None
0x00 Command received successfully and is executing
0x01 Command invalid in current configuration
0x02 Not in Production window
0x40 Not in REMOTE mode
0x41 Program running – cannot execute command
“MOVE TO FRONT”
Move dispense head to front
location
See Appendix F – “MOVE TO
FRONT” remote command
None
0x00 Command received successfully and is executing
0x01 Command invalid in current configuration
0x02 Not in Production window
0x40 Not in REMOTE mode
0x41 Program running – cannot execute command