Owner's manual

Table B-1 Collection Events (Continued)
Appendix B - Collection Events B-11
Collection Event Name CEID
Related
Data Variables
Description
ce_NeedleZOffsetsFail 3786 6294
Collection event when SECS/GEM remote command “NEEDLE Z
OFFSETS”.
ce_NeedleXYOffsetsNoPurgeFail 3787 None
Collection event when SECS/GEM remote command "NEEDLE XY
OFFSETS NO PURGE" fails.
ce_PPSelectCompleteFail 3788 None
Collection event when host process program select (recipe file) fails to
load.
ce_ValvePressureSetPt_V1 3789 430 Collection event when valve pressure set point changes on valve 1.
ce_FluidPressureSetPt_V1 3790 431 Collection event when fluid pressure set point changes on valve 1.
ce_CoolingPressureSetPt_V1 3791 432 Collection event when cooling pressure set point changes on valve 1.
ce_ValvePressureSetPt_V2 3792 433 Collection event when valve pressure set point changes on valve 2.
ce_FluidPressureSetPt_V2 3793 434 Collection event when fluid pressure set point changes on valve 2.
ce_CoolingPressureSetPt_V2 3794 435 Collection event when cooling pressure set point changes on valve 2.
ce_ValidationStarted 3795 None
Collection event when SECS/GEM remote command “VALIDATION
START” begins process.
ce_CarrierReceivedFromDownstream 3796 None
Collection event when carrier is received from downstream during
validation.
ce_ValidationComplete 3797 None Collection event when carrier validation is complete.
ce_ControlDotWeightON 3798 11299
Collection event when SECS/GEM remote command “CONTROL DOT
WEIGHT” enables fluid control dot weight.
ce_ControlDotWeightOFF 3799 11299
Collection event when SECS/GEM remote command “CONTROL DOT
WEIGHT” disables fluid control dot weight.
ce_SubstrateCornerLocs 3800 530 Collection event when substrate corner locations are saved.
ce_HSAtScale2LidZ 3801 531 Collection event when height sense at scale 2 Z position is saved.
ce_TactileCenter 3802 532 Collection event when tactile center location is saved.
ce_SendCarrierDownstream 3803 None Not used.
ce_SendCarrierUpstream 3804 None No used