Owner's manual

Table B-1 Collection Events (Continued)
Appendix B - Collection Events B-9
Collection Event Name CEID
Related
Data Variables
Description
ce_VacuumOffPass 3757 None
Collection event when SECS/GEM remote command “VACUUM OFF”
completes successfully.
ce_NeedleXYOffsetsNoPurgePass 3758 None
Collection event when SECS/GEM remote command “NEEDLE XY
OFFSETS NO PURGE” completes successfully.
ce_RestartApplication 3759 None
Collection event when SECS/GEM remote command “RESTART
APPLICATION” completes successfully.
ce_LmoWpFidNotFound_1 3760 7706, 7708
Collection event when fiducial 1 of Local Machine Workpiece is not
found.
ce_LmoWpFidNotFound_2 3761 7707, 7709
Collection event when fiducial 2 of Local Machine Workpiece is not
found.
ce_DHLinearFluidSensorLevel 3762 1539, 1540
Collection event when level is checked by Fluidmove (Before each
board). Collection event 3709 is used for level percent and state
variables.
ce_HSXYOffsetsFail 3763 None
Collection event when SECS/Gem remote command “HS XY OFFSETS”
fails.
ce_TeachScaleFail 3764 None
Collection event when SECS/Gem remote command “TEACH SCALE”
fails.
ce_NeedleXYOffsetsFail 3765 None
Collection event when SECS/Gem remote command “NEEDLE XY
OFFSETS” fails.
ce_PurgeFail 3766 None Collection event when SECS/GEM remote command “PURGE” fails.
ce_PrimeFail 3767 None Collection event when SECS/GEM remote command “PRIME” fails.
ce_LocateServiceStationFail 3768 None
Collection event when SECS/GEM remote command “LOCATE
SERVICE STATION” fails.
ce_MoveHomeLocationFail 3769 None
Collection event when SECS/GEM remote command “MOVE HOME”
fails.
ce_MovePurgeLocationFail 3770 None Not used.
ce_PrelimNeedleToCameraFail 3771 None
Collection event when SECS/GEM remote command “PRELIM NEEDLE
TO CAMERA” completes successfully.